SafetyLink ™ Pty Ltd has been operating as a manufacturer of Height Safety equipment for over a decade. 

Our product range includes anchors, staticline systems, permanent ladder systems and ladder stabilizers.
 
Our anchor range includes the SafetyLink ™ Energy Absorbing Eyebolt. 

This eyebolt was developed and tested extensively to maximize energy absorption while retaining its strength when arresting a fall.  

The eyebolts tapered design enables it to bend like a fishing pole to reduce the load back on the structure and the person attached to the anchor. 

This unique energy absorbing quality has been incorporated into all of SafetyLink ™ anchors.
 
The SafetyLink ™ Energy Absorbing Eyebolt is available in two purpose built designs.

The Standard Eyebolt is designed for fall arrest, the eyebolt’s long tapered stem is designed to absorb energy while arresting a fall therefore reducing the load off the structure and the person.

To maximize this design the eyebolt starts to bend at a lower load. The standard eyebolt is not designed for a constant live load.

The Abseiling Eyebolt is a fall arrest anchor which uses the same tapered concept as the standard eyebolt but incorporates a broader design enabling the eyebolt to withstand a live load without activating the bending motion that occurs when arresting a fall.

The Standard and Abseiling eyebolts have been tested to over 24kN force.
 
The SafetyLink ™ StaticLine range uses the same tapered principle to ensure all end anchors and intermediates have the same energy absorbing capabilities. 

Our streamlined design ensures traversing across a surface with our pass through intermediates a safe and simple task.
 
SafetyLink ™ products can be attached to a number of different surfaces such as steel purlins, timber rafters, concrete, brickwork and metal roof sheeting.
 
Typical uses of SafetyLink ™ products include trades people working at heights on buildings and building sites in the following situations: 

› Installation of roofing
› Installation and dismantling of safety rails
› Solar heating
› Electrical and plumbing work
› State emergency service personnel
› Repairing damaged roofing
› General roof and building maintenance
› Air conditioning and roof ventilation
› TV aerials and satellite dishes
› Cleaning at heights
 
All SafetyLink ™ products undergo extensive testing in a multitude of scenarios and our experienced technical support team is complemented with comprehensive installation manuals.

WARNING - Any installation of height safety components/products must be carried out by a competent person.

Person/s must be safe at all times.

READ ENTIRE HANDBOOK BEFORE USING ANY SAFETYLINK PRODUCT. 

FAILURE TO FOLLOW ALL WARNINGS AND INSTRUCTIONS MAY RESULT IN A SERIOUS INJURY OR DEATH.

STANDARD EYEBOLTS MUST ONLY BE USED AS A FALL ARREST ANCHOR.

ABSEILING EYEBOLTS ARE TO BE USED FOR ROPE ACCESS (ABSEILING).

SURFACE MOUNTED ANCHORS MUST NOT BE USED FOR ROPE ACCESS (ABSEILING).

SafetyLink’s surface-mounted multi-directional FrogLink™ will set a new benchmark in the field of height safety.

This revolutionary all in one unit has been designed to attach to all metal profiles with a single row of attachment holes. This unique configuration makes it a fast simple unit for installation.

Its low profile reflective design is a plus for any commercial or residential enterprise wanting to maintain an aesthetically pleasing façade.

The FrogLink™ doesn’t just look good, its dynamic design reduces the load back onto the structure and person attached to the anchor from 25.76kN to 3.1kN.

SafetyLink’s FrogLink™ is tested and manufactured in accordance with the applicable Australia and New Zealand Standards AS/NZS 1891.4 and is rated as a two person anchor.

TileLink Complete Unit

PRODUCT CODE: TILEL001

Quick to install, with amazing performance ability SafetyLink’s patented TileLink™ is the perfect anchor for tile and slate roofs.

It combines energy absorbing capabilities with a design that is practically invisible when looking at the roof.

The TileLink’s design emulates the extraordinary FrogLinks™ energy absorbing regions, allowing it in the event of a fall to reduce the impact on the structure and person attached to the TileLink™.

Its sleek design means fixing to a rafter is a simple task of screwing five (12 gauge, 50mm roofing screws)  through the TileLinks existing holes. Five alternate fixing rows enable the TileLink™ to be positioned to suit the pattern of the roof tile.  The TileLink™ fits snuggly between the existing tile eliminating waterproofing issues.

The 316 stainless steel TileLink™   is tested and manufactured in accordance with the applicable Australian and New Zealand Standards AS/NZS 1891.4 and is rated as a two person anchor.